TiDo

	Socket This motherboard features a Socket 775 design.
	Chipset The P5Q Green motherboard is based on the Intel P45 Northbridge chipset and the Intel ICH10R Southbridge chipset. It supports Intel Core 2 Quad, Core 2 Duo, Core 2 Extreme, Pentium Dual Core, Celeron Dual Core, Pentium 4 LGA775 and Celeron 4xx (05B/05A/06 Compatible) Processors, with Hyper-Threading Technology and 800/1066/1333/1600MHz Front Side Bus support.
	Memory Expansion The P5Q Green provides 4 DIMM sockets using Dual Channel 240-pin DDR2 with a total capacity of up to 16GB-64bit. You can install DDR2 667/800/1066/1200MHz Memory. (When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended)
	PCI Express 2.0 Support PCI Express Base 2.0 specification doubles the interconnect bit rate from 2.5 GT/s to 5 GT/s in a seamless and compatible manner. The performance boost to 5 GT/s is by far the most important feature of the PCI Express 2.0 specifications. It effectively increases the aggregate bandwidth of a 16-lane link to approximately 16 GB/s. The higher bandwidth will allow product designers to implement narrower interconnect links to achieve high performance.
	IDE The P5Q Green includes built in IDE facilities that support Ultra DMA 66/100/133.
	Audio The P5Q Green comes with a Realtek ALC1200 high definition audio codec which supports high quality 8-channel audio.
	Serial ATA Support The P5Q Green supports the Serial ATA technology through the Serial ATA interfaces. Doubles bus bandwidth which provides blazingly high disk performance, up to 3.0Gb/s. (6) Six internal SATA ports support RAID 0, 1, 5 and 10 solutions. (2) Two remaining internal SATA ports support performance up to 3.0Gb/s only.

Features

• Intel® Dual-Core Processing
  Runs two independent processor cores in one physical package at the same frequency. Features 2 MB of shared L2 cache and 800 MHz Front Side Bus.
• Intel® Wide Dynamic Execution
  Improves execution speed and efficiency, delivering more instructions per clock cycle. Each core can complete up to four full instructions simultaneously.
  
• Intel® Smart Memory Access
  Optimizes the use of the data bandwidth from the memory subsystem to accelerate out-of-order execution. New pre-fetch algorithms move data from system memory into fast L2 cache in advance of execution. These functions keep the pipeline full, improving instruction throughput and performance. 45nm versions further improve this feature, with more efficient methods of loading and storing data in main memory.
• Intel® Advanced Smart Cache
  The shared L2 cache is dynamically allocated to each processor core, based on workload. This efficient, dual-core optimized implementation increases the probability that each core can access data from the fast L2 cache, significantly reducing latency to frequently used data and improving performance.
• Intel® Advanced Digital Media Boost
  Accelerates the execution of Streaming SIMD Extension (SSE) instructions to significantly improve the performance on a broad range of applications, including video, audio, image and photo processing, multimedia, encryption, financial, engineering, and scientific applications. The 128-bit SSE instructions are now issued at a throughput rate of one per clock cycle, effectively doubling execution speed on a per clock basis over previous generation processors.
  
• Intel® 64
  An enhancement to Intel’s 32-bit architecture to enable the processor to access larger amounts of memory. With appropriate 64-bit supporting hardware and software, platforms based on an Intel processor supporting Intel 64 can allow the use of extended virtual and physical memory.
• Execute Disable Bit
  Provides enhanced virus protection when deployed with a supported operating system. The Execute Disable Bit allows memory to be marked as executable or non-executable, allowing the processor to raise an error to the operating system if malicious code attempts to run in non-executable memory, thereby preventing the code from infecting the system.
• Intel Designed Thermal Solution for Boxed Processors
  Includes a 4-pin connector for fan speed control to help minimize the acoustic noise levels generated from running the fan at higher speeds for thermal performance. Fan speed control technology is based on actual CPU temperature and power usage.