Specifications
- ADSL Compliance
Compliant with ADSL standards:
- Full-rate ANSI T1.413 Issue 2, ITU G.dmt (G.992.1) standards
- Splitterless G.lite (G.992.2) specification
Compliant with ADSL 2 standards:
- G.dmt.bis (ITU G.992.3)
Compliant with ADSL 2+ standards:
- G.992.5
- ADSL2 Annex L (Reach extended ADSL)
DMT modulation and demodulation
Full-rate adaptive modem
- Maximum downstream rate of 8 Mbps (ADSL), or 24 Mbps (ADSL 2+)
- Maximum upstream rate of 896 Kbps (ADSL), or 1024 Kbps (ADSL 2+)
Supports splitterless ADSL implementation
Interoperable with all major DSLAM manufacturers
- ATM Protocols
WAN mode support: PPP over ATM (RFC 2364) and PPP over Ethernet (RFC 2516)
LAN mode support: Bridged/Routed IP over ATM (RFC 1483) and Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to eight virtual circuits
ATM segmentation and re-assembly
ATM AAL5 (adaption layer type 5)
OAM F4/F5
- Bridge Mode
Ethernet to ADSL self learning - Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses
- Router Mode
Static routing
DNS Server
DHCP (Dynamic Host Configuration Protocol) server and client and Relay
NAT (Network Address Translation)
NAPT (Network Address and Port Translation)
RIP V1 and V2
PPP Half Bridge
Virtual Server/DMZ Support
- Wireless 802.11
Compliant with IEEE 802.11g and 802.11b standards
2.4 GHz - 2.484 GHz frequency range
Up to 54 Mbps wireless data rate
Zoom 125 Speed Booster for up to 125 Mbps effective rate
64/128 bit Wired Equivalency Protection (WEP) with Pass Phrase
Wi-Fi Protected Access (WPA) with Pass Phrase
802.1X Authentication
- Security
Stateful Packet Inspection (SPI)
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
VPN passthrough: PPTP, L2TP, IPsec tunnel
Advanced Firewall Ports Filtering
Black Lists
Attack Protection
Denial of Service Protection
Port Scan Detection and Prevention
- Ethernet Interface
IEEE 802.3 compliant
Four 10/100 Mbps auto-sensing RJ-45 ports Wireless Interface
Two antennas, one internal and one swivel external
- Management
Password protected access
Universal Plug and Play (UPnP)
SNMP Version 2
Remote and local command line or HTTP interface configuration
Software upgradeable firmware through HTTP interface
Loads setup from a file for easy input of a service provider’s configuration
ATM traffic management functions support UBR, CBR, rt-VBR, nrt-VBR in accordance with ATM forum TM 4.1
- Status Indicators
Five front panel indicators: Wired LAN connection, Wireless connection, ADSL link, Modem status, Power
Eight rear panel indicators report port speed, activity, and link for each Ethernet port
- HTML graphic user Interface
Password protected access
Firmware upgrades
WAN and LAN side connection statistics
Configuration of static routes and routing table
Selection of bridge or router mode
PPP user ID and password
Configuration of virtual circuits
Features
- ADSL2/2+ compliant modem for faster ADSL speeds
- Zoom 125 Speed Booster provides a wireless speed boost for data rates above 802.11g*
- 802.11g Wireless Access Point with non-blocking 802.11b support
- Built-in router provides shared Internet access for up to 253 concurrent users
- Built-in 10/100 fourport Ethernet switch
- Wi-Fi Protected Access (WPA) for improved wireless security
- Works with all popular ADSL services
- Provides Virtual Private Networking Passthrough
- Advanced security from hacker attacks with Stateful Packet Inspection, Packet filtering, Denial of Service attack and Port Scan detection and prevention
- Protection against IP Spoofing and other common attacks
- SNMP Support (Simple Network Management Protocol)
- Two high-performance antennas for superior wireless range
- Universal Plug and Play (UPnP)
- Easy installation
Minimum System Requirements
- A computer with an Ethernet port, or 802.11g, or 802.11b wireless capability and any operating system that supports TCP/IP (Windows, Mac, Linux or other)
|